How To Distinguish The Quality Of Work Clothes?

< p > often listen to customers say that the custom-made work clothes before will appear all kinds of quality problems, when purchasing, can not distinguish, caused a lot of losses.

Then, if the quality of the work clothes is identified, experts have summarized the quality of the work clothes mainly from the following 5 aspects: < /p >

< p style= "text-align: center" > < img border= "0" align= "center" alt= "" src= "" /uploadimages/201403/18/20140318100521_sj.JPG "/" < > > "

< p > 1. The appearance of the work clothes.

The work clothes should be neat, flat, symmetrical, folded and straight, and all parts should be pressed and levelled without leakage, no dead wrinkles, no thread and no yarn.

The line should be suitable for fabric, including color, texture, fastness, shrinkage and so on. They should be roughly the same so as to ensure the inner quality and appearance quality of the garment.

The color of buttons should be commensurate with fabric color.

< /p >

< p > two, work clothes < a href= "//www.sjfzxm.com/news/index_c.asp" > size < /a >.

< a href= "//www.sjfzxm.com/news/index_c.asp" > clothing model < /a > setting must be carried out according to the relevant stipulations of the "clothing model series" standard.

The specification is limited to the tolerance range allowed by the standard.

< /p >

< p > three, the color difference of the work clothes.

Chromatic aberration is the requirement for the work clothes.

According to the stipulation of the national standard for color difference, the upper collar, bag fabric and trousers side seam are the main parts, the color difference is higher than the four grade, and the other surface parts are four.

The color difference test of work clothes is borrowed from "fading fastness card of color fastness".

The sample card is one of the national standards formulated by the Ministry of textile industry.

The sample card is made up of five pairs of grey standard samples and divided into five grades.

The five stage is the best color fastness, the chromatic aberration is zero, and the grade four to the first level is the relative degree of increase of fading.

< /p >

< p > four, < a href= "//www.sjfzxm.com/news/index_c.asp" > work clothes < /a > defects.

According to the standard, only one defect is allowed in each independent part.

That is to say, there are defects on the garment piece, and no defects can be found on the pouch and bag cover in this independent part.

The types of defects vary with different fabrics.

The decision should be carried out according to the standard.

The independent part is the area which is divided into the clothing piece. According to the main parts of the clothing piece, it is divided into 1, 2, 3, 4 and four regions.

Each part is an area on the garment piece.

< /p >

< p > five, sewing of work clothes.

In the needle spacing density, specify the distance between the open line (including the invisible line of the open line), and 14 to 18 needles per 3cm.

There are many varieties of fabrics. In order to ensure the appearance and firmness of the products, different stitches should be chosen for different fabrics.

For example, the stitch distance of hard fabric can be thinning, and the stitch spacing of soft fabric can be denser.

The line of the sewing part is not allowed to bend at random, it must conform to the needs of the modelling of the work clothes; the line must be neat, no overlap, no jumping needle and throwing line, the stitch is clear and beautiful, the sewing start and stop needles must be firm, the length of the lap line should be suitable, no leakage needle and off-line phenomenon, and the stitching tightness should be suitable for the thickness and texture of the fabric.

< /p >

< p > with these 5 points, will you be able to tell the quality after choosing your work clothes?

< /p >