How To Choose The Right Laser Cutting Machine

With the increasingly fierce market competition and the continuous upgrading of market demand, such as metal

And other laser equipment has been widely used.

How to choose a suitable laser cutting machine? Below, the author analyzes this problem.

In the author's opinion, the choice of a suitable metal laser cutting machine generally depends on the production material. In general, the following problems should be considered:

1. cut seam fine: laser cutting slotting is usually 0.10mm-0.20mm.

2. smooth cutting surface: laser cutting without burrs.

3. thermal deformation is small:

The laser slit is thin, fast and energy concentrated, so the heat pferred to the cutting material is small, causing the deformation of the material to be very small.

4., it is suitable for the processing of large products: the cost of mold manufacturing for large products is very high, and laser processing does not require any mold manufacturing. For this reason, we suggest that the machine needle be replaced by one, and try to slow down the delivery time of the cloth delivery, which will solve this problem.

Moreover, laser processing can completely avoid the collapse of the material when punching and shearing, which can greatly reduce the production cost of the enterprise and raise the grade of the product.

5., it is very suitable for the development of new products and shortens the R & D cycle. Once the product drawings are formed, laser processing can be carried out immediately. For the problem that the stitching machine does not float in the zipper stop, the combination of on-line and thin lines is not easy to occur.

What we usually call "rough line" refers to rough lines or rough lines on the upper and lower lines.

You can get the new product in the shortest time; even if there is a floating line fault, it will be easier to solve; the latter will easily appear floating line fault, and it will be more difficult to solve.

6. material saving: laser processing is programmed by computer.

Different types of products can be used for material tailoring, the stitching machine on the line and the difference between the thickness and the line will definitely produce different sewing effects.

Under normal circumstances, the on-line and offline should be chosen as thick, but sometimes in practice, we do not pay attention to it. We choose to make the on-line rough and offline lines to maximize the utilization of materials.