Design Of Double Brazed Semi Cylinder Men'S Boots

A half tube shoe is a boot with a tube height between the middle tube and the low tube.

As the height of the half cylinder boots can not be found the corresponding width and size, the frame diagram of the middle cylinder boots should be first designed, and then the height of the half tube boots should be truncated.

As shown in Fig. 5-4-4, there is a drill strap on the upper and lower sides of the boot.

Because the boot tube is closed structure and is more fat, it uses the drill pipe to adjust the foot binding ability.

 

The outer boot has a split fork and a shoe tongue, which can adjust the tightness with the drill belt.

The front part of the shoe has a gourd, which is processed by double conversion and pick up, and the lower drill belt is sleeved on the gourd, which has the function of tightening.

Other designs are the same as before.